SM5210 Mifare Module Evaluation Kit

SM5210-EK is an evaluation kit for SM5210 Mini Mifare Modules.

It comes with a base board (SM2251) for SM5210 modules and provides connectivity for RS232, UART, I2C, I/O and pcb antenna.

It can be used to develop your application quickly or it can simply demonstrate main features of the SM5210 Mifare module.

Base board is integrated with RS232 Driver chip. User can use on board RS232 with the provided cable or alternatively use the USB-UART Converter(optional) to power and communicate thru UART.

Same base board (SM2251) can be used with SM1250-Mini 125KHz RFID Modules as well. Only antenna needs to be replaced for a 125KHz RFID application.

Kit Content

1x SM2251 Base Board  

1x SM5210 Mini Mifare Module  (Firmware: stdMifareV201_STD-B-P@19200bps / Type B Connection)

1x PA1356-1 PCB Antenna  (55x55mm)

1x PA1356-3 PCB Antenna  (45x50mm)

1x PA1356-4 PCB Antenna  (26x45mm)

1x PA3030 PCB Antenna  (30x30mm)

2x Mifare-1K ISO Card

1x Special RS232 Cable (3 pin cable connector  to DB9 RS232 Female)

Optional
1x USB-UART Converter (3.3V/5V) inc. Micro USB Cable

USB-UART converter can supply 3.3V or 5V(selectable with jumper) to the kit and communicate over UART with the module only with 5 pin.
It can also be used for general purpose where UART communication thru PC is required.

Optional

Optional

125KHz RFID Extension
1x SM1250-Mini 125KHz RFID Module (Firmware: stdProxB100 @19200 / Type B Connection)
1x IND25-1-C Antenna with connector (65x35mm)
1x IND25-2-C Antenna with connector (90x45mm)
1x IND25-3-C Antenna with connector (42x18mm)
2x EM4102 ISO Card (5 Byte Read Only) 

Same kit can be used to evaluate SM1250-Mini 125KHz RFID Modules as well.

Only module and antenna needs to be replaced.
Please take additional care that you are using right antenna for the right module.
125 KHz module requires coil wire antenna and Mifare module requires PCB Antenna