Serial Mifare® Reader (RS232 / UART / I2C)

SM2300 is a compact, ready-to-go, OEM serial reader that includes all neccessary components for 13.56 MHz RFID Mifare® Reader/Programmer including the PCB antenna, on board 5V regulator, I/O pins, LEDs and a buzzer. SM2300 can be easily and quickly integrated into RFID Mifare® applications with very less effort.

SM2300 holds a SM5210 Mini Mifare Module on board.

* For UART communication; a resistor configuration is required.

* RS485 communication is available upon request.

• Ready-To-Go open frame Mifare reader/programmer board without enclosure.

• 5V or 9V/12V DC operation.

• Integrated with 5V regulator and PCB Antenna.

• Supports read/write of ISO14443A Mifare® Classic 1K, Mifare® Classic 4K, Mifare® UltraLight and ISO14443A type NFC Tags.

• Supports reading serial number of ISO14443A tags including Mifare Plus®, Mifare DESFire®
• UART and RS232 Interface - 9600bps to 11520bps, I2C Interface - up to 400KHz  

• Control-able General Purpose Outputs and Inputs

• Fast data transfer - Contactless communication up to 106Kbit/s

• Secure - Encrypted contactless communication

• Firmware Upgrade-able

SM2300 can be controlled over UART/RS232 /I2C. Card operations such as authentication, read and write can be performed by simple commands or can read tag data automatically without requiring any external controller in auto mode.

Reader performs all required analog and digital signal processes and make the tag data ready to be sent over UART/ I2C/ Wiegand and can output signal to trigger Buzzer/LED/Relay circuit.

It is integrated with bootloader and can be upgraded over UART-RS232. Customization is available.